Sistema ottico per il controllo della stampiglitura, anellatura e marcatura su fibra ottica.
For inspecting marked cables and fibre optic “ringing”
Non-contact measurement of speed, length and position without scale or point of reference Compatible with multiple materials, surfaces and colours Very high accuracy and repeatability Class 1 laser scanning system Robust design with compact dimensions and low weightIncremental interface TTL or HTL Speed range up to 10 m/s Counting forwards and backwards Opens up a […]
Maximum accuracy, reliability and versatility with LS single-axis series lasers for extruded products with a maximum diameter of 0.1 to 120 mm.
Maximum accuracy, reliability and versatility with LS biaxial series lasers for extruded products with a maximum diameter of 0.1 to 120 mm.
Remote controller with audible and visual alarm, useful in noisy environments Display YK1 b – YK2A or Touch screen 7″ – PLC 7″ Adaptable to any surface thanks to its versatility With 75 dB siren and red LED for signalling out-of-tolerance non-compliance
For measuring cable and hose samples with an external diameter of up to 95 mm (3.74″) The new AlphaOne: a combination of precision and flexibility. With the compact yet highly accurate measuring device for gauging the profiles of cables and hoses, you gain new possibilities in your quality assurance process. Field of application: High-precision measuring device […]
Small remote display for the remote viewing of a single preset value Useful for displaying different values of your choosing Average value, X-axis and Y-axis
Automates the profile measurement process with VCPX5 which, with the simple click of a button pre-customised to your needs, will perform measurements fully automatically up to 130 mm. For measuring cable samples with an external diameter of up to 130 mm (5.11 inches) The VCPX5 cable gauge is designed for geometric measurements for core insulation […]
VCPLab enables you to complete your measurements and controls professionally and efficiently, under the supervision of a laboratory technician. For cable samples with an external diameter of up to 40 mm (1.57″).The VCPLab cable meter is a camera-based system for measuring cable geometries from insulation and conduits. The integrated high-resolution sensors allow very accurate measurements […]
Stand-alone system for high-precision and fast measurement of wire guides, nozzles and design moulds.The camera-based system for measuring guides and nozzles allows only instruments tested independently of users to be utilised in production. It is specially designed for use in production, the tool room and laboratory.
Highly complex image processing compliant with current standards – at the click of a buttonVELOX measurement software evaluates the results obtained from the VCPX5 and AlphaOne cross-sectional gauges with state-of-the-art image processing algorithms.
Save up to ⅔ on measurement uncertainty with well-prepared samples.Sample preparation follows the IEC 60811 standard. With the O-Ring Cutter 150, it is really quick and easy to cut sample slices (cable cutter) with an external diameter of 20 to 150 millimetres (0.78–5.9″). With customised clamps, it is also possible to cut cable samples with […]
Save up to ⅔ on measurement uncertainty with well-prepared samples. With the O-Ring Cutter 80, it is really quick and easy to cut samples of hard materials (PE, XLPE) with an outer diameter of 15 to 80 mm (<3.15 “). Samples are optimally prepared for measurements in cable measuring devices. Advantages for you: Cable O-Ring […]
Save up to ⅔ on measurement uncertainty with well-prepared samples. Easy to use… With the O-Ring Cutter 65, it is really quick and easy to cut slices of samples (cable cutter) with an outer diameter from 1 to 65 mm (<2.56 “). Samples are optimally prepared for measurements in the offline cable with measuring devices. […]
Save up to ⅔ on measurement uncertainty with well-prepared samples
Device for sample preparation of flat cables up to max. 75 x 8 mm (2.95 x 0.31 “) width x heightSaves up to ⅔ of measurement uncertainty with well-prepared samples CAUTION: Electrical conductors must be removed before cutting!Easy to use…With the Flat Cable Cutter FCC75, it is really easy and efficient to cut sample slices […]
Specially designed for soft materials. Hard materials such as PE, XLPE, HDPE or rigid rubbers may be possible depending on the characteristics of the sample. To be sure, send samples to iiM AG for evaluation.
TO SEPARATE THE CABLE/INSULATION SHEATHS FROM THE ELECTRICAL CONDUCTOR
TO PUNCH THE SPECIMEN WITH A BELL HAMMER FOR FURTHER TESTING (E.G., HOT SET TEST)
Punch for removing solid electrical conductors
2-in-1: the device contains the Hot Set Test and Heat Pressure Test Robust and compact set that includes the device and an equipment case Possibility of attaching a thermometer directly near the sampleMeasurement according to IEC 60811 -507 (Hot Set Test) and IEC 60811-508 (Heat Pressure Test) regarding sample and weight attachment Precise weight selection […]
Low-temperature Cold Bend Test device
To measure the twisted length of sheathed cables
Easy and precise arrangement of cable samples
Aluminium stand created to support our LS series lasers Drilled and prepared for quick and easy in-line set-up
Remote Controller, used for automatic line control via PID Analogue output and relay for out-of-tolerance 1 B – Displays average diameter and deviation from set value.2A Like YK1B, with three programmable displays and programming keyboard
Small remote display for remote viewing of two parameters of choice,including circularity. Composed of three tolerance indicator LEDs